Uluslararası Makaleler

 

A54. YAHŞİ YONCA, EVCİN ATİLLA (2020) “Synthesis and Characterizations of Magnetite- Borogypsum for Radiation Shielding”, Emerging Materials Research, 2046-0147.

A53. ÇİFTÇİ HAKAN, ERSOY BAHRİ, EVCİN ATİLLA (2020) “Purification of Turkish bentonites and investigation of the contact angle, surface free energy and zeta potential profiles of organo-bentonites as a function of CTAB concentration”, CLAYS AND CLAY MINERALS, vol.68, pp.250-261.

A52. ÇİÇEK BEZİR NALAN, EVCİN ATİLLA, İNCEOĞLU AYŞE, CEYLAN OZAN, ÖZCAN BURCU (2020) “Production and Characterization of Barium-Titanate Nanofibers”, ACTA PHYSICA POLONICA A, vol.137, pp.542-544.

A51. ÇİÇEK BEZİR NALAN, AKAR VOLKAN, PERÇİN ÖZKORUCUKLU SABRİYE, YILDIRIM BAŞTEMUR GİZEM, EVCİN ATİLLA, CEYLAN OZAN (2020) “Application of TiO2 Dye-Sensitive Solar Cells by Electrochemical Storage Method”, ACTA PHYSICA POLONICA A, vol.137, pp.513-518.

A50. ATLI İSMAİL SİNAN, EVCİN ATİLLA (2020) ” nalysing Mechanical Behaviors of Carbon Fiber Reinforced Silicone Matrix Composite Materials after Static Folding”, Journal of Polytechnic, vol.23, pp. 351- 359.

A49. ÇIFTÇI HAKAN, ERSOY BAHRI, EVCIN ATILLA (2020). Pillared Magnetite/Clay Structures as a Function of CTAB and TEOS Concentration. Emerging Materials Research, 9(1), 1-7., Doi:10.1680/jemmr.18.00148

A48. ÇIÇEK BEZIR NALAN, BOZKURT BILAL, EVCIN ATILLA, ÖZCAN BURCU, KIR ESENGÜL, AKARCA GÖKHAN, CEYLAN OZAN (2019). Enhanced antibacterial activity of silver-doped chitosan nanofibers. AIP Conference Proceedings, 2178(0300003), 1-6., Doi: 10.1063/1.5135401

A47. YAHSI YONCA, EVCIN ATILLA, AKKURT ISKENDER, ÇIÇEK BEZIR NALAN, GÜNOGLU KADIR, KUTU NURAY (2019). Evaluation of boron waste and barite against radiation. International Journal of  Environmental Science and Technology, 16(9), 5267-5274., Doi: 10.1007/s13762-019-02333-3

A46. ATILA DENIZ HAZAL, KARATAS AYTEN, EVCIN ATILLA, KESKIN DILEK, TEZCANER AYSEN (2019). Bacterial cellulose-reinforced boron-doped hydroxyapatite/gelatin scaffolds for bone tissue engineering. Cellulose, 1-21., Doi: 10.1007/s10570-019-02741-1

A45. AKPINAR SÜLEYMAN, EVCIN ATILLA (2019). Silan ile Modifiye Edilmis Mermer Toz Atıklarının Epoksi Polimer Dolgusu Olarak Kullanımının Arastırılması. El-Cezerî Journal of Science and Engineering, 6(3), 712-725., Doi: 10.31202/ecjse.575067

A44. EVCIN ATILLA (2019). SrAl2O4: Eu2, Dy3 Nanoliflerin Faz Kararlılıgı Üzerine Bor Katkısının Etkisi. European Journal of Science and Technology(16), 16-25., Doi: 10.31590/ejosat.497884

A43. EVCIN ATILLA, BÜYÜKLEBLEBICI BAKI (2019). Ti6Al4V coating with B2O3 and Al2O3 containing hydroxyapatite by HVOF technique. Scientia Iranica, 26(3), 1980-1989., Doi:10.24200/sci.2019.50994.1958

A42. EVCIN ATILLA, AKPINAR SÜLEYMAN, ERSOY BAHRI, ÖZGÜL METIN, YAZICI ZIYA ÖZGÜR, UÇAR MUSTAFA (2019). Surface modification of marble wastes in the silicone matrix using various carboxylic acids. INDIAN JOURNAL OF CHEMICAL TECHNOLOGY, 26(3), 270-273.

A41. ATLI ISMAIL SINAN, EVCIN ATILLA (2019). Analysing Mechanical Behaviors of Carbon Fiber Reinforced Silicone Matrix Composite Materials after Static Folding. Journal of Polytechnic, Doi:10.2339/politeknik.548885

A40. EVCIN ATILLA, BOHUR BETÜL GÖKÇEN (2019). Coating of different silica sources containing hydroxyapatite for Ti6Al4V metal substrate using HVOF technique. Arabian Journal of Geosciences, 12(6), Doi: 10.1007/s12517-019-4302-7

A39. EVCIN ATILLA, ERSOY BAHRI, ÇIFTÇI HAKAN (2019). Utilization of marble and boron waste in brick products. International Journal of Computational and Experimental Science and Engineering, 5(1), 19-22., Doi: 10.22399/ijcesen.480487

A38. EVCIN ATILLA, EKSI FATMA (2018). SiO2 doped carbon nanofiber by electrospinning process. AIP Conference Proceedings, 2042, 200021-200025., Doi: 10.1063/1.5078874

A37. EVCIN ATILLA, YAHSI YONCA, ÇIÇEK BEZIR NALAN, ERSOY BAHRI (2018). Use of ilmenite and boron waste as a radiation shielding panel. AIP Conference Proceedings, 2042, 200011-200015., Doi: 10.1063/1.5078873

A36. YAHSI YONCA, EVCIN ATILLA (2018). Comparison of Different Algorithms in the Radiotherapy Plans of Breast Cancer. ITM Web of Conferences, 22, 1048, Doi: 10.1051/itmconf/20182201048

A35. ÇIÇEK BEZIR NALAN, EVCIN ATILLA, SENOL EMINE, OZCAN BURCU, KIR ESENGÜL, AKARCA GÖKHAN, SESLI ÇETIN EMEL, KAYALI REFIK, KASIKCI OZEN MURIVET (2018). Antibacterial Properties of Different Ratio Ce Doped TiO Nanofibers Prepared by Electrospinning Process. Materials Focus, 7(5), 599-603., Doi: 10.1166/mat.2018.1557

A34. YAHSI YONCA, EVCIN ATILLA (2018). Differentiation of Using Flattening Filter Free Energy in Vmat Plans for Prostate Cancer. ITM Web of Conferences, 22, 1049, Doi:10.1051/itmconf/20182201049

A33. EVCIN ATILLA, ÇIÇEK BEZIR NALAN, DUMAN RESAT, DUMAN NILAY (2018). UV Resistibility of a Carbon Nanofiber Reinforced Polymer Composite. World Academy of Science, Engineering and Technology, International Science Index 142, International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 12(10), 575-578., Doi:10.5281/zenodo.1474978

A32. EVCIN ATILLA, ERSOY BAHRI, AKPINAR SÜLEYMAN, ATLI ISMAIL SINAN (2018). Characterization of Electrospun Carbon Nanofiber Doped Polymer Composites. World Academy of Science, Engineering and Technology, International Science Index 142, International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 12(10), 509-513., Doi:10.5281/zenodo.1474769

A31. BIÇER EYÜP CAN, EVCIN ATILLA, GÜRAKSIN GÜR EMRE (2018). Characterization of Hydroxyapatite Coating on Ti6Al4V by Sol-gel Method. International Journal of Computational and Experimental Science and Engineering (IJCESEN), 4(3), 15-19., Doi: 10.22399/ijcesen.379088

A30. ÇIÇEK BEZIR NALAN, EVCIN ATILLA, DIKER RAMAZAN, ÖZCAN BURCU, KIR ESENGÜL, AKARCA GÖKHAN, ÇETIN EMEL SESLI, KAYALI REFIK, ÖZEN KASIKÇI MÜRIVET (2018). Investigation of Antibacterial Properties of Ag Doped TiO2 Nanofibers Prepared by Electrospinning Process. Open Chemistry, 16(1), 732-737., Doi: 10.1515/chem-2018-0081

A29. EVCIN ATILLA, ERSOY BAHRI, UYGUNOGLU TAYFUN, GÜNES IBRAHIM (2018). Farklı mineral katkıların epoksi zemin kaplama malzemesinin ıslanmazlıgına ve yüzey enerjisine etkisi. Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 33(2), 581-590., Doi:10.17341/gazimmfd.416368

A28. UYGUNOGLU TAYFUN, GÜNES IBRAHIM, ERSOY BAHRI, EVCIN ATILLA (2017). Kendiliginden yerlesen polimerik harçlarda mineral katkının reolojik özeliklere etkisi. Gazi ÜniversitesiMühendislik-Mimarlık Fakültesi Dergisi, 32(4), 1365-1378., Doi: 10.17341/gazimmfd.369858

A27. ALSARRAY ESRAA, AKKURT ISKENDER, GÜNOGLU KADIR, EVCIN ATILLA, ÇIÇEK BEZIR NALAN (2017). Radiation Shielding Properties of Some Composite Panel. ACTA PHYSICA POLONICA A, 132(3), 490-492., Doi: 10.12693/APhysPolA.132.490

A26. ÇIÇEK BEZIR NALAN, EVCIN ATILLA, OKÇU HAKAN, KAYALI REFIK, KALELI MURAT, ALDEMIR DURMUS ALI (2017). Effect of Layer Thickness on I-V Characteristics of GaInP Nanofibers Fabricated by Electrospinning on n-Si Substrates. ACTA PHYSICA POLONICA A, 132(3), 638-641., Doi:10.12693/APhysPolA.132.638

A25. ÇIÇEK BEZIR NALAN, EVCIN ATILLA, KAYALI REFIK, KASIKÇI ÖZEN MÜRIVET, ESEN KAMER (2017). Comparison of Five-Layered ZrO2 and Single-Layered Ce, Eu, and Dy-Doped ZrO2 Thin Films Prepared by Sol-Gel Spin Coating Method. ACTA PHYSICA POLONICA A, 132(3), 612-616., Doi:10.12693/APhysPolA.132.612

A24. GÜNES IBRAHIM, UYGUNOGLU TAYFUN, EVCIN ATILLA, ERSOY BAHRI (2017). Investigation of Wear Strength of Blast Furnace Slag Blended Polymer Materials. ACTA PHYSICA POLONICA A, 132(3), 599-603., Doi: 10.12693/APhysPolA.132.599

A23. ÖZDEMIR YUSUF, AKPINAR SÜLEYMAN, ABBAK SAMET, EVCIN ATILLA (2017). Effect of Calcined Colemanite Addition on the Rheological Behaviour of Porcelain Suspension. Acta Physica Polonica A, 132(3-II), 825-829., Doi: 10.12693/APhysPolA.132.825

A22. EVCIN OGUZHAN, EVCIN ATILLA, ÇIÇEK BEZIR NALAN, AKKURT ISKENDER, GÜNOGLU KADIR, ERSOY BAHRI (2017). Production of Barite and Boroncarbide Doped Radiation Shielding Polymer Composite Panels. ACTA PHYSICA POLONICA A, 132(3-II), 1145-1148., Doi:10.12693/APhysPolA.132.1145

A21. ATLI ISMAIL SINAN, EVCIN ATILLA (2017). An Experimental Study on Investigation of Carbon Fiber- Silicone Interfacial Shear Strength. El-Cezeri Journal of Science and Engineering, 4(3), 541-546.

A20. EVCIN ATILLA, ARLI EMRUMIYE, BAZ ZEYNEP, ESEN RAMAZAN, SEVER ESRA GÜL (2017). Characterization of Ag-TiO2 Powders Prepared by Sol-Gel Process. ACTA PHYSICA POLONICA A, 132(3), 608-611., Doi: 10.12693/APhysPolA.132.608

A19. ÇIFTÇI HAKAN, ERSOY BAHRI, EVCIN ATILLA (2017). Synthesis, characterization and Cr(VI) adsorption properties of modified magnetite nanoparticles. ACTA PHYSICA POLONICA A, 132(3), 564-569., Doi: 10.12693/APhysPolA.132.564

A18. ÇIÇEK BEZIR NALAN, EVCIN ATILLA, KAYALI REFIK, ÖZEN MÜRIVET KASIKÇI, BALYACI GAMZE (2017). Comparison of Pure and Doped TiO2 Thin Films Prepared by Sol-Gel Spin-Coating Method. ACTA PHYSICA POLONICA A, 132(3), 620-624., Doi: 10.12693/APhysPolA.132.620

A17. AKPINAR SÜLEYMAN, ÖZDEMIR YUSUF, EVCIN ATILLA (2017). Effect of calcined colemanite additions on properties of hard porcelain body. Ceramics International, 43(11), 8364-8371., Doi:10.1016/j.ceramint.2017.03.178

A16. ARSOY ZEYNI, ERSOY BAHRI, EVCIN ATILLA, IÇDUYGU MEHMET GALIP (2017). Influence of dry grinding on physicochemical and surface properties of talc. Physicochemical Problems of Mineral Processing, 53(1), 288-306., Doi: 10.5277/ppmp170124

A15. ÇIÇEK BEZIR NALAN, EVCIN ATILLA, KAYALI REFIK, KASIKCI ÖZEN MÜRIVET, ESEN KAMER, CAMBAZ E B (2016). Characteristic Properties of Dy Eu Ce Co Doped ZrO2 Nanofibers Fabricated via Electrospinning. ACTA PHYSICA POLONICA A, 130(1), 300-303., Doi:10.12693/APhysPolA.130.300

A14. KAYALI REFIK, KASIKCI ÖZEN MÜRIVET, ÇIÇEK BEZIR NALAN, EVCIN ATILLA (2016). Effect of concentration of Sm2O3 and Yb2O3 and synthesizing temperature on electrical and crystal structure of Bi2O3 1 x y Sm2O3 x Yb2O3 y electrolytes fabricated for IT SOFCs. Physica B: Condensed Matter, 489, 39-44., Doi: 10.1016/j.physb.2016.02.031

A13. ÇIÇEK BEZIR NALAN, EVCIN ATILLA, KAYALI REFIK, KASIKÇI ÖZEN MÜRIVET, OKTAY AYSE (2016). Investigation of structural electronic and optical properties of pure and Ag doped TiO2 nanofibers fabricated by electrospinning. CRYSTAL RESEARCH AND TECHNOLOGY, 51(1), 65-73., Doi:10.1002/crat.201500159

A12. KASIKCI ÖZEN MÜRIVET, KAYALI REFIK, ÇIÇEK BEZIR NALAN, EVCIN ATILLA (2016). Synthesizing of Bi2O3 1 x yHo2O3 x Dy2O3 Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells. ACTA PHYSICA POLONICA A, 129(1), 125-132., Doi: 10.12693/APhysPolA.129.125

A11. UÇAR SONGÜL, EVCIN ATILLA, UÇAR MUSTAFA, ALIBEYLI RAFIG, MAJDAN MAREK (2015). Aktive Edilmis Klinoptilolit Kullanılarak Sulu Ortamdan Fenol ve Klorofenollerin Uzaklastırılması. Hacettepe Journal of Biology and Chemistry, 43(3), 235-249., Doi: 10.15671/HJBC.20154314246

A10. EVCIN ATILLA, ÇIÇEK BEZIR NALAN, KAYALI REFIK, KASIKÇI ÖZEN MÜRIVET, OKTAY AYSE (2015). Characteristic Properties of Dy Eu Ag co Doped TiO2 Nanoparticles Prepared by Electrospinning Processes. ACTA PHYSICA POLONICA A, 128(2B), 303-307., Doi: 10.12693/APhysPolA.128.B-303

A9. ERSOY BAHRI, EVCIN ATILLA, UYGUNOGLU TAYFUN, AKDEMIR ZEHRA BEDRIYE, JOSHUA WAHRMUND, WITOLD BROSTOW (2014). Zeta Potential Viscosity Relationship in Kaolinite Slurry in the Presence of Dispersants. Arabian Journal for Science and Engineering, 39(7), 5451-5457., Doi:10.1007/s13369-014-1146-z

A8. EVCIN ATILLA, ÇIÇEK BEZIR NALAN, KAYALI REFIK, ARI MEHMET, KEPEKÇI DENIZ BELKIS (2014). Indium phosphide nanofibers prepared by electrospinning method Synthesis and characterization. CRYSTAL RESEARCH AND TECHNOLOGY, 1-6., Doi: 10.1002/crat.201300424

A7. GÜNAY AHMET, ERSOY BAHRI, DIKMEN SEDEF, EVCIN ATILLA (2013). Investigation of equilibrium kinetic thermodynamic and mechanism of Basic Blue 16 adsorption by montmorillonitic clay. ADSORPTION-JOURNAL OF THE INTERNATIONAL ADSORPTION SOCIETY, 19(2-4), 757-768., Doi:10.1007/s10450-013-9509-4

A6. EVCIN ATILLA (2011). Investigation the Effects of Different Deflocculants on the Viscosity of Slips. Scientific Research and Essays, 6(11), 2302-2305.

A5. EVCIN ATILLA, KAYA DUDU ASLI (2010). Effect of production parameters on the structure and morphology ofaluminum titanate nanofibers produced using electrospinning technique. SCIENTIFIC RESEARCH AND ESSAYS, 5(23), 3682-3686.

A4. EVCIN ATILLA, TUTKUN OSMAN (2009). PERVAPORATION SEPARATION OF ETHANOL WATER MIXTURES BY ZEOLITE FILLEDPOLYMERIC MEMBRANES. CERAMICS-SILIKATY, 53(4), 250-253.

A3. ERSOY BAHRI, KAVAS TANER, EVCIN ATILLA, BASPINAR MUSTAFA SERHAT, SARIISIK ALI, ÖNCE GÜNER (2008). The effect of BaCO3 addition on the sintering behavior of lignite coal fly ash. FUEL, 87(12), 2563-2571., Doi: 10.1016/j.fuel.2008.03.012

A2. KAVAS TANER, EVCIN ATILLA (2005). Use of Afyon region Turkey volcanic tuffs in wall tile production. REFRACTORIES AND INDUSTRIAL CERAMICS, 25(1), 17-19.

A1. EVCIN ATILLA, ÖRENCIK SEZEN, KAVAS TANER (2004). Effects of inorganic salts on rheological properties of slips. EURO CERAMICS VIII, PTS 1-3, 264268, 1609-1612.